Roytec Industries, Inc. has years of experience in cutting and stripping a wide variety of wires, ranging from 32 AWG wire to 535 MCM  cable - from single conductor to multiple conductors. 

We deal with many insulation types, including PVC, Teflon, Kynar, X-Link, Fiberglass, Dacron/Mylar/Dacron (DMD) which requires hot blades to seal the insulation prior to stripping and numerous others.  We are experienced with whip assemblies, ribbon cable, semi-rigid coax cable, and other specialty type work required by our customers.  Stripped ends can be fluxed and tinned, terminated, welded, or any combination.  We can apply practically any terminal on the market today on lengths from 1/2" up.  If your harness requires taping, tying, molding, braiding, or if your wires need to be marked or labeled, our trained staff will produce parts to your specifications.  We have produced harnesses with up to 450 leads per assembly.

Roytec also offers a machine shop and a full-time, certified machinist enabling us to produce and repair tooling in-house.  Technical staff is available to handle prototypes or to work with your engineering department on design.

· · · · · · · · · · · · · · · · · · · ·

If you need to find us, click here for a Map and Directions to our USA location or click here for Directions to our Mexico Location.

If you have any questions about our operations, don't hesitate to give us a call at 770-926-5470.

· · · · · · · · · · · · · · · · · · · ·

About Roytec | Products | Support | Careers | Contact Us | Home